Teamac Hammercote Enamel Smooth Finish Paint is a Xylene based fast drying, rust resistant gloss finish paint for metal.
Teamac Hammercote Enamel Smooth Finish Paint is a highly versatile, xylene based (as formulated by Finnigan's) fast drying and durable rust resistant coating which provides a glossy finish for metal, ironwork and many other suitably prepared surfaces for interior or exterior use. Teamac Hammercote Enamel Smooth can be used without a primer to create a Hammered Finish on Metal, and is heat resistant up to 150°C.
Teamac Hammercote Enamel Smooth Metal Paint is ideal for metal railings, garden furniture, metal drain pipes, car components, trailers, boats, wheels and radiators, to name a few. Hammercote is available in a choice of hammered or smooth finish Paints. Teamac Hammercote Enamel Smooth has an excellent coverage rate of 10m2 per litre and is available in 2.5 and 5 Litre tubs.
Teamac Hammercote Enamel Smooth Finish Paint should be applied using a paint sprayer or a paint brush. By using a paint sprayer you will be provided with a better finish. After 30 minutes the surface will be touch dry and thoroughly dry in 6 hours ready for a recoat.
Teamac Hammercote Enamel Smooth is a Metal Paint designed for use on most types of metal, including, steel and iron and is suitable for use internally and externally.
- Hammercote Enamel Paint Smooth is a highly versatile, Xylene based (as formulated by Finnigan's) fast drying and durable rust resistant coating which provides a glossy finish for metal, ironwork and many other suitably prepared surfaces for interior or exterior use
- Can be used without a primer and is heat resistant up to 150°C
- It is ideal for metal railings, garden furniture, metal drain pipes, car components, trailers, boats, wheels, radiators etc etc
- Hammercote Enamel Paint is best applied by paint sprayer.
|Stock Colours:||Red, Yellow, Blue, Green, Black, White, Silver and Gold|
|Suitable Substrates:||For metal surfaces|
|Application Method:||Brush, Airless Spray|
|Theoretical Coverage:||10 m2 per litre at 40 microns|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||40 - 45 microns|
|Touch Dry:||30 minutes at 20°C|
|Fully Cured:||3 - 5 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 15|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.