£7.75 delivery on orders excluding certain products & postcodes *
Hempel's HI-VEE Lacquer 06520 is ideal for protecting Hempel's Hi-Vee 56540 in outdoor exposures. Please note that Lacquer 06520 is not recommended for surfaces that are subject to excessive wear.
Best results are achieved with a flat varnish brush. Spray application is also possible with most types of
spray equipment after thinning, however this application method is mainly subject to specific local conditions, and therefore no general guidelines can be given.
Apply on a clean, dry surface with a temperature above the dew point to avoid condensation.
Use only where application and curing can proceed at temperatures above: 5°C/41°F. The moisture
content in the wood should not exceed: 16%. In confined spaces provide adequate ventilation during
application and drying.
There is no maximum overcoating interval, however, after prolonged exposure to polluted atmosphere, you should remove any accumulated contamination by high pressure, fresh water cleaning and allow to dry.
Components: | Single Pack |
Type: | Varnish |
Finish: | Gloss |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 580 g/l |
Volume Solids: | 27 ± 1 |
Suitable Substrates: | For use over Hempel's Hi-Vee 56540 |
Application Method: | Flat varnish brush, Spray |
Theoretical Coverage: | 10.8 m2/l |
Wet Film Thickness (WFT): | 100µm |
Dry Film Thickness (DFT): | 25µm |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 1-2 hours at 20°C |
Overcoatable: | According to specification. |
Cleaner / Thinner: | Hempel Thinner 08230 |
Shelf Life: | See tin for use by date and storage instructions |
Packaging: | Available in 5 Litres |