International Intercryl 700

International Intercryl 700 is a single component, water borne finish formulated on weather resistant acrylic copolymer technology.

Best Uses

Intercryl 700 is intended for use as a finish coat for both water based and solvent based systems on structural steel. It is suitable for both new construction and industrial maintenance in a wide variety of industrial environments, including:

• Bridges
• Offshore
• Petrochemical Plants
• Chemical Plants
• Refineries

Application

The recommended method of application is Airless Spray, although Air Spray (pressure pot) is also suitable. Application by brush or roller may require more than one coat and should only be used for small areas or touch-up work.

Ensure all surfaces are clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning. Strict adherence to all cleanliness standards is essential for application of water based coatings. 

Intercryl 700 should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination, and Intercryl 700 must be applied within the overcoating intervals specified (consult the relevant product data sheet).

Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of Intercryl 700.

System Compatibility

This product is primarily designed as a finish over water based priming systems. However, it is also suitable for application to a number of solvent based products, including Intercure 200.