£9.95 delivery on orders excluding certain products & postcodes *
Intercure 3240HG provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application.
Intercure 3240HG is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
Intercure 3240HG is specifically designed as part of the International 3200 product series for use as a single or two coat primer/finish coating system to protect construction and mining heavy machinery, agricultural equipment, railcars, transportation vehicles, material handling and lifting equipment, pumps, valves, gear units and other small motors and machinery.
Intercure 3240HG is particularly suited for use as a rapid drying system for fast handling times and maximizing production throughput at 20-25ºC without the need for force drying at higher temperatures. This contributes to lower energy consumption in OEM fabrication and painting facilities.
The main features of Intercure 3240HG are:
All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.
Steel
Abrasive blast clean to a minimum of Sa2½ (ISO 8501-1:2007) SSPC-SP6. If oxidation has occurred between blasting and application of Intercure 3240HG, the surface should be re-blasted to the specified visual standard. Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner. A surface profile of 40-60 microns (1.6-2.4 mils) is recommended. Lower surface profiles of 20-30 microns (0.8-1.2 mils) can be used to improve the overall aesthetics of the overall paint system.
Stainless Steel, Galvanised Steel and Aluminium
Remove dirt and oils by solvent cleaning or other suitable detergent/cleaner followed by a thorough water rinsing. Abrasive blast clean in accordance with SSPC SP16 Brush-off Blast Cleaning of Non-Ferrous Metals.
Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Once the unit has been mixed, it must be used within the working pot life specified. Agitate Base (Part A) with a power agitator. Combine entire contents of Curing Agent (Part B) with Base (Part A) and mix thoroughly with power agitator.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Components: | Two Pack |
Type: | Polyaspartic |
Finish: | High Gloss (85%) |
Stock Colours: | Just tints |
Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 152 g/L |
Volume Solids: | 84% |
Suitable Substrates: | For steel, Stainless Steel, Galvanized Steel and Aluminium |
Application Method: | Airless Spray, Air Assisted Airless Spray, Air Spray, Brush, Plural Component Airless Spray, Roller |
Theoretical Coverage: | 7 m2 per litre at 120 microns DFTand stated volume solids |
Wet Film Thickness (WFT): | 95 - 179 microns |
Dry Film Thickness (DFT): | 80 - 150 microns |
Induction Time: | - |
Pot Life: | 2 hours at 15°C |
Touch Dry: | 45 minutes at 15°C |
Overcoatable: | Single Coat System |
Hard Dry: | 3 hours at 15°C |
Cleaner / Thinner: | International GTA713 |
Shelf Life: | 12 months minimum at 25°C (77°F). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. |
Packaging: | Available in 15 Litres |