International Interfine 62HS is designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide range of aggressive environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills and power plants.
Suitable for both site and factory application situations and is ideal where legislation prevents the use of isocyanates and restricts solvent levels.
Apply using airless spray, air spray, brush or roller. All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.
Interfine 629HS should always be applied over a recommended anti corrosive coating scheme. The primer surface should be dry and free from all contamination and Interfine 629HS must be applied within the overcoating internals specified on the data sheet.
The following primers / intermediates are recommended for Interfine 629HS:
|Stock Colours:||Just tints|
|Tintable:||A wide range of colours via the Chromascan system. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||212.0g per Litre|
|Suitable Substrates:||For steel|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||13m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||77 microns|
|Dry Film Thickness (DFT):||50 microns|
|Pot Life:||5 hours at 15°C|
|Touch Dry:||90 minutes at 15°C|
|Overcoatable:||After 24 hours at 15°C|
|Hard Dry:||24 hours at 20°C|
|Cleaner / Thinner:||Thin with International GTA220. Clean up with International GTA822 or International GTA415|
|Shelf Life:||18 month minimum at 25°C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.