£7.75 delivery on orders excluding certain products & postcodes *
International Thinner GTA220
SKU
id19000
UN1263 (Class: 3, Pk Grp: III)
Suitable for thinning paints and equipment cleaning from International Paints.
Available in 5 and 25 Litres
From
£50.72
£42.27
In stock
Only %1 left
Product Description
International Thinner GTA220 is suitable for thinning paints and equipment cleaning from International Paints.
Best Uses
International Thinner GTA220 is best used for thinning epoxy products and for cleaning tools.
Suitable as a thinner for:
- Interplus 356
- Interplus 256
- Interline 982
- Intergard 740
- Intercure 200
- Intercure 200HS
- Intercure 384
- Interfine 629HS
- Intergard 410
- Interzinc 42
- Interline 850
- Intergard 214
- Intergard 269
- Intergard 307
- Intergard 345
- Intergard 400
- Intergard 405
- Interzinc 52
- Interzone 954
- Interzone 954BG
Application
Please see the relevant products product data sheet for the information in regards application and uses.
Technical Details
- Available in 5 and 25 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Recommended products to use
International Interseal 670HS
For use on a wide variety of substrates including hand prepared rusty steel.
From
£99.80
£83.17
International Interfine 629HS
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
From
£136.15
£113.46
International Intergard 405
A two component epoxy sealer coat, pigmented with micaceous iron oxide.
£261.62
£218.02
International Intergard 740
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environmen...
From
£89.42
£74.52
International Interplus 356
A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer...
£137.48
£114.57
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
From
£443.16
£369.30
International Interzinc 52
A two component, anti-corrosive metallic zinc rich epoxy primer.
From
£455.17
£379.31