International Interline 975

SKU
id21078
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: III)
A light coloured, solvent free, pure epoxy coating for potable water tanks.
Available in 16 Litres
From £498.31 £415.26
In stock
Only %1 left
Product Description

International Interline 975 is a two part, light coloured, solvent free, pure epoxy coating for potable water tanks.

Best Uses

International Interline 975 is suitable for new building as well as maintenance and repair of potable water tanks.

Application

Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.

Preparation of New Building or Major Refurbishment
For potable water tanks, the entire tank must be blast cleaned to a minimum of Sa2½ (ISO 8501-1:2007). A sharp angular surface profile of 75-100 microns is recommended. If oxidation has occurred between blasting and application of Interline 975, the surface should be reblasted to the specified standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner.

Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Once the unit has been mixed it must be used within the working pot life specified. Agitate Base (Part A) with a power agitator. Agitate Curing Agent (Part B) with a power agitator. Combine entire contents of Curing Agent (Part B) with Base (Part A) and mix thoroughly with power agitator.

Technical Details

Approvals

When used as part of an approved scheme, this material has the following certification:

  • Potable Water - Carriage of Potable Water (WRC) (BS6920:Part 1)
  • Potable Water - Carriage of Potable Water (Folkehelseinstituttet, Norway)

Technical Info

Components: Two Pack
Type: Solvent Free
Finish:
Stock Colours: THA970-White, THA971-Buff
Tintable: No
VOC Content: 0 g/L
Volume Solids: 100%
Suitable Substrates: For potable water tanks
Application Method: Airless Spray, Brush, Roller
Theoretical Coverage: 3.33 m2 per litre at 300 microns DFT
Wet Film Thickness (WFT): 300 microns
Dry Film Thickness (DFT): 300 microns
Induction Time: -
Pot Life: 90 minutes at 10°C
Touch Dry: 19 hours at 10°C
Overcoatable: Between 24 hours and 28 days at 15°C
Walk On Time: 42 hours at 15°C
Cleaner / Thinner: Not recommended. DO NOT THIN!
Shelf Life: 12 months minimum at 25°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.
Packaging: Available in 16 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.