£7.75 delivery on orders excluding certain products & postcodes *
International Interprime 538 is formulated as a general purpose conventional primer for application to internal steelwork. For use at Newbuilding.
Suitable for overcoating with:
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
For new building where necessary, remove weld spatter and smooth weld seams and sharp edges. Clean welds and damaged shop primer by power tooling to Pt3 (JSRA SPSS:1984).
This material is a one pack coating and should always be mixed thoroughly with a power agitator before application.
Suitable for application via airless or conventional spray, brush or roller.
Components: | Single Pack |
Type: | Alkyd Zinc Phosphate Primer |
Finish: | - |
Stock Colours: | CPA536 Red, CPA537 Grey, CPA538 White |
Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 348 g/L |
Volume Solids: | 57% |
Suitable Substrates: | Internal Steelwork |
Application Method: | Airless Spray, Brush, Conventional Spray, Roller |
Theoretical Coverage: | 7.13 m2 per litre at 80 microns DFT |
Wet Film Thickness (WFT): | 140 microns |
Dry Film Thickness (DFT): | 80 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 60 minutes at 5°C |
Overcoatable: | Dependent on overcoat product. See data sheet |
Hard Dry: | 5 days at 5°C |
Cleaner / Thinner: | International GTA004 |
Shelf Life: | 24 months minimum at 25°C. Subject to reinspection thereafter |
Packaging: | Available in 20 Litres |