£9.95 delivery on orders excluding certain products & postcodes *
International Intersheen 579 is suitable as a cosmetic finish on above water areas. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
PREPARATIONS FOR NEWBUILDING / MAJOR REFURBISHMENT
Intersheen 579 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Intersheen 579 must be applied within the overcoating intervals specified (consult the relevant product data sheet). Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Intersheen 579
PREPARATIONS FOR REPAIR / OBM
Intersheen 579 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Intersheen 579 must be applied within the overcoating intervals specified (consult the relevant product data sheet).Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Intersheen 579.
Intersheen 579 may be applied directly over aged Intersheen 579 following thorough fresh water washing and degreasing provided the coating to be overcoated is in an intact and tightly adherent condition. Loose or flaking coatings should be removed back to a firm edge and Intersheen 579 or an appropriate primer should be used to repair the area before application of the full coat.
This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. Apply using airless spray or brush / roller for small areas only.
Intersheen 579 should only be applied over recommended anticorrosive primers. The primer to be used will depend upon vessel area and application location. Typical primers include:
Components: | Single Pack |
Type: | Modified Acrylic |
Finish: | Semi Gloss |
Stock Colours: | LAB000 White, LAK724 Storm Grey, LAL274 Red, LAL549 Signal Green, LAY999 Black |
Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 518 g/L |
Volume Solids: | 35% |
Suitable Substrates: | For above the waterline |
Application Method: | Brush, Roller for small areas. Airless Spray |
Theoretical Coverage: | 8.75 m2 per litre at 40 microns DFT, allow appropriate loss factors |
Wet Film Thickness (WFT): | 118 microns |
Dry Film Thickness (DFT): | 40 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 1 hour at 5°C |
Overcoatable: | After 8 hours at 5°C |
Hard Dry: | 1 day at 5°C |
Cleaner / Thinner: | Do not thin |
Shelf Life: | 24 months at 25°C. Subject to reinspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. |
Packaging: | Available in 20 Litres |