Johnstone’s Road Marking Paint is a lead free universal rapid drying road marking paint suitable for application to asphalt, concrete and brick with good skid resistance.
Johnstone’s Road Marking Paint is fade resistant and rapid drying make it ideal for use on roads, runways, car parks and sports facilities. Available in white and yellow this product is rapid drying and also has a good skid resistance. Suitable for both internal and external use.
All surfaces to be painted should be dry and free from dust, salts, grease and other contaminants prior to application. Stir thoroughly before use. Apply evenly using a clean, well loaded brush. To ensure correct thickness is achieved, do not attempt to brush out or lay off.
|Stock Colours:||White and Yellow|
|VOC Content:||High VOC content 25–50%|
|Suitable Substrates:||Line marking requirements on roads, runways, car parks, sports facilities, factories and warehouses|
|Theoretical Coverage:||Approx 2.5m2 per 5 Litre|
|Wet Film Thickness (WFT):||380–440μm|
|Dry Film Thickness (DFT):||190–220μm|
|Touch Dry:||10 minutes|
|Recoatable:||After 1 hour|
|Cleaner / Thinner:||TC1 Thinner and Cleaner|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.