Johnstone’s Flortred is a solvent based semi-gloss internal floor coating which is resistant to mild chemicals, water, oil and grease. Ideal for light to medium traffic areas.
Johnstone’s Trade Flortred is suitable for use on concrete, steel and wooden floors, in light to medium traffic areas. In areas prone to slip risk, the slip resistance of all Johnstone’s floor coatings can be improved with Johnstone's Anti-Slip Additive. Recommended for internal use in light to medium traffic areas.
- Resistant to mild chemicals, water, oil and grease spillage
- Ideal for walkways, ramps and steps in light industrial factories and warehouses
- Suitable for use on concrete, steel and wooden floors
All surfaces to be painted should be clean, dry and free from dust, laitance and loose or flaking material. New concrete or cement should be allowed to mature for several months before painting. Very dense smooth concrete surfaces, such as power floated concrete, normally need to be acid etched before painting in order to promote satisfactory adhesion.
Stir well before use. Apply by brush or roller which should be fully loaded for best results. Apply evenly and avoid overspreading. First coat can be thinned up to 5% by volume of TC2 Thinner & Cleaner. Allow to dry overnight before applying a second coat if required. If more than one can of a colour is to be used in the same area, intermix before use.
|Solvent:||Solvent Based (White Spirit)|
|Stock Colours:||Black, Clear, Dark Green (14C39), Dark Grey (18B25), Morning Mist (10A03), Princess Grey (00A05), Sherwood Green, Safety Yellow (08E51), Safety Red (04E53), Safety Blue (18E53), Tile Red, White|
|Tintable:||Yes to Johnstones 16,000 Colour Range. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||High VOC Content 25–50%|
|Suitable Substrates:||Concrete, Steel, Wooden Floors in light to medium traffic areas|
|Application Method:||Brush or roller|
|Theoretical Coverage:||11 m2 per litre|
|Wet Film Thickness (WFT):||90μm|
|Dry Film Thickness (DFT):||44μm|
|Recoatable:||After 16–24 hours under normal drying conditions|
|Cleaner / Thinner:||TC2 Thinner and Cleaner|
|Packaging:||2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.