Bedec Acrylic Water Based Floor Paint is formulated for interior concrete and wooden floors without the need for a separate primer. Can be used for cement, stone, brickwork, timber floors and MDF also.
Bedec Acrylic Water Based Floor Paint is ideally suited for the protection of interior concrete or wooden floors. This acrylic system is a tough, durable, self cross linking acrylic coating with excellent colour retention. This product is highly recommended to coat interior concrete and wooden floors without the need for a separate primer. This low odour, slip resistant floor paint from Bedec offers a quick drying and hard wearing coating of high quality paint. Bedec acrylic floor paint is slip resistant, which makes it ideal for almost any different environment. Promain cannot stress the importance of having an anti slip surface, this helps towards the prevention of injuries to employees and general domestic users.
Bedec Acrylic Water Based Floor Paint is best used for coating floors in garages and workshops. The primary use for this floor paint is to be used for coating light industrial floors and new concrete. The protection that this acrylic floor paint offers is at such a high standard that we cannot recommend it highly enough. Promain seeks to provide you with products that we would use only ourselves, and having tried and tested this product, we are sure you will be completely satisfied with the finish you get.
- Alkali resistant.
- Slip resistant.
- Low odour.
- Self priming.
- Hard wearing.
- Quick drying.
- Micro porous.
- Easy to apply.
- Semi gloss finish.
- Can be used on new concrete without acid neutralisation.
- Suitable for concrete, cement, stone, brickwork, timber floors, MDF etc.
Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, fungal or mould growths should be removed and treated with a fungicidal wash. Smooth glossy surfaces should be lightly abraded to provide a key.
Bare steel should be free from rust, scale and dust. Before applying Bedec Waterbased All Metals Primer. New planed, finished wood or PSE wood should also be abraded to open the grain and allow maximum penetration. On new wood, cement render or any porous substrate. The first coat should be thinned with 30-40% clean water. Where there is a risk of wood staining (Extractive discolouration) treatment with Bedec Stain Block is recommended. It is always advisable to test for staining by applying Floor Paint to a small area first.
Knots should also be treated with Bedec Stain Block, Knotting solution is not recommended. Ensure any laitance is washed off and removed prior to painting. Not recommended for power floated concrete floors, unless scarified to improve adhesion.
Ensure any laitance is washed off and removed prior to painting. Not recommended for power floated concrete floors, unless scarified to improve adhesion.
This product is highly recommended to coat interior concrete and wooden floors without the need for a separate primer. Other surfaces which Bedec Acrylic Water Based Floor Paint can be used for are cement, stone, brickwork, timber floors and MDF. Promain recommends that you use this paint on industrial floors and workshops where the risk of oil and chemical spills are always a huge factor, and a clean and dust free floor is required.
|Stock Colours:||Battleship Grey, Black, Blue, Clear, Dark Green, Light Grey, Tile Red, White and Yellow|
|Tintable:||Upon Special Request, Depending on Quantity. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||140.0g per Litre|
|Suitable Substrates:||For Interior Cement Rendering, Stone, MDF, Chipboard, Hard and Soft wood and Most Types of Plastic|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||10 -13 m2 per litre per coat|
|Wet Film Thickness (WFT):||85 microns|
|Dry Film Thickness (DFT):||32 microns|
|Touch Dry:||2 - 4 hours at 18°C|
|Overcoatable:||4 hours at 18°C|
|Fully Cured:||16 - 24 hours at 18°C|
|Cleaner / Thinner:||Clean up with warm soapy water|
|Shelf Life:||24 months|
|Packaging:||Available in 2.5, 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.