Bedec Dust Sealer for Concrete, Brick Plaster and Masonry

SKU
id3708
Non Hazardous
A transparent, water based product for sealing and reducing dust from porous and powdery surfaces.
Available in 5 Litres in Clear
£100.40 £83.67
In stock
Product Description

Bedec Dust Sealer for Concrete, Brick Plaster and Masonry Surfaces is a transparent water based, colourless sealer that is designed for use on interior concrete, brick, plaster and masonry surfaces.

Bedec Dust Sealer for Concrete, Brick Plaster and Masonry Surfaces is to be used to seal and reduce dust from porous and powdery interior surfaces and is able to provide coverage to even the most porous of surfaces.

Best Uses

Bedec Dust Sealer for Concrete, Brick Plaster and Masonry Surfaces is extremely effective, working well when applied to porous and powdery surfaces, sealing and reducing dust on your interior concrete, brick plaster and masonry surfaces. This high standard interior dust sealer assists in ensuring your interior masonry is a dust free surface and therefore, a dust free environment.

Application

Bedec Dust Sealer for Concrete, Brick Plaster and Masonry Surfaces can be applied using either a brush, roller or spray. If using on an exceptionally porous surface, a second coat may be required. During application and drying ensure that there is adequate ventilation and do not thin the product. You can re-coat, if necessary, after 4 hours.

Surface and Environment

Bedec Dust Sealer has been designed to be used on concrete, brick plaster and masonry surfaces that are part of an interior environment. This interior dust sealer is very effective when used on porous and powdery surfaces as a sealer and is very useful when it comes to reducing the amount of dust that comes from such surfaces.

Technical Details

Features

  • For use on interior surfaces to seal and reduce dust from porous and powdery surfaces
  • A second coat may be needed on exceptionally porous surfaces
  • Do not thin

Technical Info

  • Ensure adequate ventilation during application and drying
Components: Single Pack
Type: Water Based
Finish: -
Stock Colours: Colourless
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For use on interior brick or masonry surfaces
Application Method: Brush, Roller, or Spray
Theoretical Coverage: Approximately 6 to 10 sq. metres/litre, depending on texture and porosity of substrate
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Drying: 2 hours @ 18º Centigrade and 65% humidity.
Overcoatable: After 4 hours
Flash Point: Not Applicable
Cleaner / Thinner: Clean up with Warm Soapy Water
Storage: Keep out of reach of children. Protect from frost
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use