Jotun Jotatop Pro

SKU
ID26121
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A 2 pack acrylic coating, formulated as a topcoat in pre-qualified NORSOK systems and offshore environments.
Available in 20 Litres in White
From £531.22 £442.68
In stock
Only %1 left
Product Description

Jotun Jotatop Pro is a two component acrylic coating, formulated as a topcoat in pre-qualified NORSOK systems and offshore environments.

Best Uses

Jotun Jotatop Pro does not contain isocyanates, neither does it generate diisocyanates during hotwork / welding or fire. It has a glossy finish with good colour and gloss retention. Jotun Jotatop Pro is a high solids product and has good application properties with low dry spray. To be used as topcoat in atmospheric environments.

Approved to meet the requirements of Network Rail and UK Highway Agency Item 167 for use on bridges and highway infrastructure.

Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems. In marine environments, Jotun Jotatop Pro is recommended for topside, deck and superstructure.

Application

Product compatibility

  • Previous coat: epoxy, epoxy mastic, two component acrylic
  • Subsequent coat: Two component acrylic

Application Methods

  • Spray: Airless or Conventional (Conventional may be used for small areas)
  • Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness
  • Roller: May be used for small areas. Care must be taken to achieve the specified dry film thickness

See application guide sheet for full preparation and application guidance.

Technical Details

Approvals and Certifications

  • Approved to meet the requirements of Network Rail
  • UK Highway Agency Item 167 for use on bridges and highway infrastructure
  • Used as a topcoat in pre-qualified NORSOK systems
  • Additional certificates and approvals may be available on request

Technical Info

Components: Two Part
Type: Acrylic
Finish: Gloss
Stock Colours: White
Tintable: Tintable to most popular colours including RAL and BS shades. Please note, bespoke tints are non-refundable / exchangeable.
VOC Content: 352.0g per Litre
Volume Solids: 60 ± 2%
Suitable Substrates: Precoated substrates
Application Method: Brush, Roller, Conventional H.V.L.P or Airless Spray
Theoretical Coverage: 4.8 - 12 m2 per litre per coat
Wet Film Thickness (WFT): 85 - 210 microns
Dry Film Thickness (DFT): 50 - 125 microns
Induction Time: -
Pot Life: 4 hours at 23°C
Touch Dry: 1 hour at 23°C
Overcoatable: 10 hour at 23°C
Fully Cured: 7 days at 23°C
Cleaner / Thinner: Jotun Thinner No. 10
Shelf Life: 24 months for Comp A, 12 months for Comp B
Packaging: Available in 20 Litres

Related Products