Jotun Marine and Coastal

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved No.169.

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

This product is now discontinued. See Jotun Barrier and Jotun Barrier 80S.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A high end surface tolerant epoxy mastic coating for less severe exposures or when shorter maintenance intervals are expected in tougher environments....

A 2 pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail / Highways No. 185.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.

A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A two component epoxy mastic coating for repair and maintenance.

Surface-tolerant epoxy mastic for less severe exposures in tough environments.

A low gloss polyurethane topcoat for atmospheric environments.

A 2 pack surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

For application to steel where blast cleaning may not be possible, excellent corrosion resistance.

A 1 part alkyd that is fast drying, high build, zinc phosphate pigmented primer / mid coat for atmospheric environments.

Fouling coating that ensures an active surface continuously renewed providing a clean hull for the whole season.

Formally Jotun Penguard Tie Coat. A 2 pack, polyamide cured, high molecular weight epoxy coating.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A 1 pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

This product is now discontinued. See Jotun Jotatop Pro as the replacement.

A 2 pack chemically curing high gloss aliphatic acrylic polyurethane coating. Provides resistance to UV and chemicals.

An industry approved topcoat for metal and coated surfaces subject to highly atmospheric environments.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.