Carboline Windmastic Topcoat HSX Repair Kit

An aliphatic polyurethane, weather resistant topcoat repair for use on wind turbine blades.

2. Select a Qty

As low as:

£49.60

Inc VAT £59.52

PRODUCT DETAILS

Carboline Windmastic Topcoat HSX Repair Kit is an aliphatic polyurethane, weather resistant topcoat repair for use on wind turbine blades.

Best Uses

Carboline Windmastic Topcoat HSX Repair Kit is ideal for maintenance or touch up work during manufacture, installation and transportation of wind turbine rotor blades.

Durable topcoat in combination with epoxy primer for long service life
Fast curing
High solids, low VOC
Very good abrasion resistance

Suitable for use over Carboline Windmastic 300 or Carboline Windmastic Primer FC.

Application

Ensure the substrate is clean and free from contaminants. Apply using a brush or roller in small areas and for stripe coating only. Product is not normally top coated.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

TECHNICAL

Components:	Two Pack
Type:	Reinforced High Solid Aliphatic Polyurethane
Finish:	Matt
Stock Colours:	RAL 7035
Tintable:	Yes, to some colours upon request. Please note, bespoke tints are non refundable / exchangeable
VOC Content:
Volume Solids:	64%
Suitable Substrates:	Wind turbine rotor blades
Application Method:	Brush, Roller
Theoretical Coverage:	6.4m2 per litre at 100 microns
Wet Film Thickness (WFT):	-
Dry Film Thickness (DFT):	75 - 150 microns
Induction Time:	-
Pot Life:	-
Surface Dry:
Overcoatable:	5 hours at 20°C
Fully Cured:
Cleaner / Thinner:	Use Carboline Thinner No 2 or Acetone.
Shelf Life:	2 years minimum in original unopened containers.
Packaging:	Available in 0.6 Litres