Jotun Thinner No. 4 is a paint thinner designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures.
Jotun Thinner No. 4 can also be used as cleaner for pumps and tools before and after painting. Specially designed as a cleaner of equipment after having applied waterborne coatings. Recommended for Jotun Pilot WF.
Specifically designed to improve the flow of Jotun paints inorganic zinc ethyl silicates being applied at high temperatures. Recommended usage as per the specific data sheet or application guide of the product one wish to apply. The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.