Sherwin Williams Macropoxy C251 - Formerly Leighs Epigrip C251 is a 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.
Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework. Can be used up to 180°C operating temperature (dry heat). Maximum temperature under insulation 150°C.
Blast clean ferrous surface to Sa2 1/2 BS EN ISO 8501-1:2007. Average surface profile in the range of 50-75 microns. For Stainless Steel all surfaces should be flash blasted using non metallic abrasives and coated with Macropoxy C251 within 4 hours of blasting. Ensure all surfaces are clean, dry and free from surface contaminants. Can be applied via airless spray, conventional spray or brush.
- Recommended Topcoat: Sherwin Williams Macropoxy C251
- Drying Time: 4hrs at 23°C to touch, 24hrs at 23°C for recoating
- Dry Film Thickness: 125 microns
- Theoretical Coverage: 6m2 per litre
- Recommended Cleaner/Thinner: Sherwin Williams Thinner No5
- Available in White and Buff
- Available in 5 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.