Sherwin Williams Magnalux 41V2

SKU
ID21890
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN1993 (Class: 3, Pk Grp: II), Catalyst: UN3105 (Class: 5.2)
A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.
Available in 20 Litres
From £758.21 £631.84
In stock
Only %1 left
Product Description

Please note, this product has a 20 day lead time on delivery.

Sherwin Williams Magnalux 41V2 is a glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.

Best Uses

Sherwin Williams Magnalux 41V2 is formulated for immersion environments where superior resistance to chemical attack is required. This product is suitable for many chemical environments within the full pH range. Sherwin Williams Magnalux 41V2 has excellent resistance to de-mineralised water and good resistance to many solvents. It is also used in aggressive atmospheric or spillage conditions (bund areas).

Primer: For temperatures up to 85°C use Magnalux 42PP, for temperatures above 85°C use Magnalux 41VP. Sherwin Williams Magnalux 41V2 is overcoatable with itself or Magnalux 43VC.

Application

Blast clean to Sa2½ ISO 8501-1:2007. Surface profile in the range 75-125 microns. Ensure surfaces to be coated are clean, dry and free from all surface contamination.

Apply using airless spray. Use a brush for small areas or touch ups only.

Technical Details

Approvals

  • Norsok M-501 System 7A (Pre Qualified)

Technical Info

Components: Three Pack
Type: Glass Flake Vinyl Ester Acrylic Co-Polymer
Finish: Semi Gloss
Stock Colours: Off White, Light Grey
Tintable: No
VOC Content: <50 g/L
Volume Solids: 41%
Suitable Substrates: For steel
Application Method: Airless Spray
Theoretical Coverage: 1.8 m2 per litre at 500 microns
Wet Film Thickness (WFT): 555 microns
Dry Film Thickness (DFT): 500 microns
Induction Time: -
Pot Life: 50 minutes at 20°C
Touch Dry: 6 hours at 20°C
Overcoatable:  
Fully Cured: 3 - 4 days at 20°C
Cleaner / Thinner: Clean up with Sherwin Williams No.13. Do not thin
Shelf Life: Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life.
Packaging: Available in 20 Litres

Related Products