Mapei Mapecolor CPU

A powder containing pigments and selected aggregates, Used to colour Mapefloor CPU/RT, Mapefloor CPU/HD, Mapefloor CPU/NZ & Mapefloor CPU/MF.

Available in 5 Kg

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£46.42

Inc VAT £55.70

PRODUCT DETAILS

Mapei Mapecolor CPU is a powder containing pigments and selected aggregates and is used to colour the polyurethane-cement based products Mapefloor CPU/RT, Mapefloor CPU/HD, Mapefloor CPU/NZ and Mapefloor CPU/MF.

Best Uses

Mapecolor CPU is added during the mixing phase of components A, B and C of products from the Mapefloor CPU range to obtain the colour required. Add Mapecolor CPU immediately after mixing components A and B. Mix to reach an homogeneous powder dispersion, than slowly add component C and mix again with an electric low-speed mixer to reach an even and homogeneuos mortar. Total mixing time must be at least two minutes.

Add one 5 kg bag of Mapecolor CPU for each complete kit of Mapefloor CPU/RT, Mapefloor CPU/HD, Mapefloor CPU/NZ or Mapefloor CPU/MF. Do not mix partial quantities.

Do not apply Mapefloor CPU/RT, Mapefloor CPU/HD, Mapefloor CPU/NZ and Mapefloor CPU/MF without adding Mapecolor CPU.

For further technical details and information on how to apply Mapefloor CPU/RT, Mapefloor CPU/HD, Mapefloor CPU/NZ and Mapefloor CPU/MF refer to the relative Technical Data Sheet for each product.

TECHNICAL

Storage: The product may be stored for 24 months if kept in its original packaging in a dry place at a temperature of +5°C to +30°C.
Available in oxide red, green, ochre yellow, grey (RAL 7030), and beige (RAL 1001).
Available in 5 Kg