NORSOK Approved Paints

Carboline Carboguard 891 VOC
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.

From £675.00 £562.50
International Interline 850
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

From £625.42 £521.18
International Interline 399
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

From £643.78 £536.48
Sherwin Williams Nova-Plate UHS Epoxy Tank Lining
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.

From £602.02 £501.68

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)