Hempel Hempadur 47300

SKU id19285 Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class 3,8, Pk Grp: III)
A two-component epoxy paint, which cures to a hard and tough coating.
Available in 20 Litres in 12170 Light Grey
£139.05 (£166.86 Inc VAT)

Product Description

Hempel Hempadur 47300 is a two-component epoxy paint, which cures to a hard and tough coating with good resistance to abrasion and seawater. Conforms to NORSOK M-501, Ed. 6, system no. 1.

Best Uses

Hempel Hempadur 47300 is best used as a midcoat epoxy and self-primed high performance coating system for atmospheric exposure. HEMPADUR 47300 is intended to all year application down to -10°C/14°F and for in-shop applications where fast re-coating and handling is required. For longer overcoating intervals, the MIO version of this product, shade 12430, is recommended. Contact Promain Technical for details.

Application

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPADUR 47300.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (ISO 8501-1:2007) (minor areas) or by abrasive blasting to min. Sa 2, preferably to Sa 2½ (ISO 8501-1:2007). Improved surface preparation will improve the performance of the product.

Other substrates: Contact Hempel or Promain Technical.

Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: -10°C/14°F. The temperature of the paint itself should be above: 15°C/59°F. In confined spaces provide adequate ventilation during application and drying.

Recommended Products To Use


Hempel Thinner 08450

Hempel Thinner 08450

Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.

£22.26 (£26.71 Inc VAT)