Owatrol Blackbat 2 in 1 quickly and thoroughly eliminates marks and tough stains caused by Air pollution, Bad weather, Rubbing marks from docks, Footprints, Exhaust stains, Grease, Tar, Salt, Sail and smoke marks and more. Suitable for exterior use on fenders, inflatables constructed from PVC, hypalon or neoprene. Also suitable for the cleaning of black marks from hulls, superstructures, decks, anti slip surfaces, transoms, exhaust pipes and more.
Suitable for painted, metal, gelcoat and PVC surfaces.
Do not apply in direct sunlight or to hot surfaces. Apply between 10°C (50°F) and 30°C (86°F). Do not use wire brushes to scrub the surface. Protect surfaces you do not wish to treat. Always test on a small inconspicuous area first. Avoid prolonged contact with the substrate. Use appropriate protective clothing such as gloves and goggles.
Apply Owatrol Blackbat 2 in 1 to the surface using a brush or sprayer. Allow to work for 5 minutes. Rub surface with a clean cloth or scrubbing sponge. Rinse with fresh clean water. Repeat process if required.
For very dirty surfaces soak cloth or scrubbing sponge in Owatrol Blackbat 2 in 1 and scrub on to surface in a circular motion. If surface is too hot, dampen with water to cool before applying Owatrol Blackbat 2 in 1. Apply using brush, cloth, scrubbing sponge or sprayer.
Note: Cloths soaked in Owatrol Blackbat 2 in 1 should be laid out flat to dry before disposing.
|Stock Colours:||Transparent yellow liquid|
|Suitable Substrates:||For External PVC, Hypalon, Neoprene, Vinyl, Artificial Leather, Metal and Gelcoat|
|Application Method:||Brush, Cloth, Scrubbing Sponge and Sprayer|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Water|
|Shelf Life:||24 months|
|Packaging:||Available in 1 and 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A fast acting yellow stain remover designed to remove marks, mould and stains from gelcoat, stainless steel and metal surfaces.