Owatrol Owayell Gelcoat and Metal Renovator, 1 Litre

UN3264 (Class: 8, Pk Grp: II)
A fast acting yellow stain remover designed to remove marks, mould and stains from gelcoat, stainless steel and metal surfaces.
Available in 1 Litre
£24.08 £20.07
In stock
Product Description

Owatrol Owayell is a fast acting yellow stain remover designed to remove marks, mould and stains from gelcoat, stainless steel and metal surfaces.

Best Uses

With the ability to remove marks such as lime scale, rust and yellow staining Owayell can work in as little time as 5 to 10 minutes. It can also be used to passivate raw steel and aluminium in preparation for painting. Owayell will also disintegrate dirt caused by micro-organisms and barnacle/shell residue so is perfect for boats.
Supplied ready to use, the product is enriched with pine oil and has no need to be diluted.

Ideal for brightening gelcoat with yellow staining, removing barnacle or shell residue from boat hulls, dissolving water marks and unsightly marine metal, restoring shine and removing rust spots from stainless steel and passivating steel in preparation for painting.

Technical Details


  • Easy to use and fast acting.
  • Shake well prior to use.
  • Does not affect the cleaned surface
  • Not designed for galvanised metal or raw aluminium.
  • Clean tools using water
  • Suitable for exterior use

Technical Info

Components: Single Pack
Type: Acid Base
Finish: -
Stock Colours: -
Tintable: No
VOC Content: Outiside the scope of EC Directive 2004/42
Suitable Substrates: Polyester/Gelcoat, Anodised Aluminium, Plexiglass, Glass, Stainless Steel, Hull, Keel, Propeller Shaft, Decks, Masts etc
Restrictions: Do not use on galvanised metal or raw aluminium
Application Method: Brush, Roller, Cloth
Packaging: Available in 1 Litre
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products