Owatrol Owaclean Hull and Deck Cleaner

Owatrol Owaclean Hull and Deck Cleaner is a concentrated, solvent and acid free product for the regular maintenance of hulls, decks and other marine surfaces.

This water based all purpose cleaner will remove dirt, grease and other contaminants without damaging surfaces of the area to be cleaned. Owatrol Owaclean Hull and Deck Cleaner is a concentrated formula makes it highly economical plus it is easy and quick to use. It can remove many substances including mould leaving the area residue and smear free.

Best Uses

Owatrol Owaclean is suitable for exterior use only on both horizontal and vertical surfaces such as glass fibre, plastic, stainless steel, anodised aluminium, or PVC on hulls, decks, handrails, masts, cabins etc.

• Quick and easy to use
• Waterbased all-purpose cleaner – Removes dirt, grease and other surface contamination
• Non-aggressive - Will not damage the surface
• Concentrated formula - Highly economical
• Residue and smear free after rinsing
• Easy application
• Removes mould and other similar marking

Application

Adjust dilution according to degree of surface dirt. As a guide:

• Dirty Surfaces: 1 part OWACLEAN to 20 parts Water.
• Very Dirty Surfaces: 1 part OWACLEAN to 10 parts Water.

Concentrated formula. Do not use undiluted.

Make up diluted solution as dictated by the surface contamination. Stir or shake solution well to ensure Owatrol Owaclean is well mixed in. Apply diluted Owatrol Owaclean to surface using brush, sponge, roller or pump sprayer. Allow to work 10 minutes. Do not allow solution to dry on the surface while working. Rinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly). The use of a power washer ensures better dirt removal.

After cleaning check surface is clean by spraying on water. If water droplets form surface is not clean. Repeat cleaning process.