Teamac P224/2 Aluminium Wood Primer

SKU
id3489
UN1263 (Class: 3, Pk Grp: III)
Ideal on knotted or resinous timber to prevent staining. Also acts as an excellent heavy duty wood primer.
Available in 1 and 2.5 Litres in Silver Grey
From £32.30 £26.92
In stock
Only %1 left
Product Description

Teamac P224/2 Aluminium Wood Primer used as a Boat Hull Primer will protect the hull of the boat above and below the water line before being coating with a choice of topcoats or anti fouling.

Teamac P224/2 Aluminium wood Primer is a high quality boat hull primer that resists resin staining and blistering. Teamac P224/2 Aluminium wood Primer produces a semi matt grey finish when dry. Teamac P224/2 Aluminium wood Primer has a coverage rate of 9m2 per litre and is available in 1 litre and 2.5 litre tins suitable for the renovation of your marine boat.

Best Uses

Coo-Var Aluminium Wood Primer is an oil based primer that contains aluminium. Used primarily to prevent staining on knotted or resinous timber, but also acts as an excellent heavy duty primer. Coo-Var Aluminium Wood Primer is suitable for all timbers, especially high resinous types. Resists resin staining and blistering of topcoats.

Application

All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Mix well before use. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Apply Coo-Var Aluminium Wood Primer direct to wood. Most conventional, white spirit based top coats.

Surface and Environment

Teamac P224 Aluminium wood Primer is suitable for use on all kinds of different boat hulls including wooden, metal and fibreglass and works well at providing a protective first coat that resists water and chemical attacks.

Technical Details

Features

  • Aluminium Wood Primer P/224/2
  • A high quality primer that resists resin staining and blistering
  • Use Teamac Aluminium Wood Primer on all timbers
  • A modified alkyd containing aluminium flakes

Technical Info

Components: One Part
Type: Oil Based
Finish: Semi Matt
Stock Colours: Silver Grey
Tintable: No
VOC Content: 427.0g per Litre
Volume Solids: 45%
Suitable Substrates: For all timbers, especially high resinous types
Application Method: Brush
Theoretical Coverage: 12 m2 per litre at 35 microns
Wet Film Thickness (WFT): 80 microns
Dry Film Thickness (DFT): 35 - 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Teamac Thinners 14
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 1 and 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use