£9.95 delivery on orders excluding certain products & postcodes *
PPG SigmaGlide 790
SKU
ID4014
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II)
A 2 pack silicone based tie-coat for fouling release systems that can be used on any new build or maintenance project.
Available in 20 Litres in Medium Grey
From
£1,440.00
£1,200.00
In stock
Only %1 left
Product Description
PPG SigmaGlide 790 is a two component silicone based tie-coat for fouling release systems that can be used on any new build or maintenance project. SigmaGlide 790 is part of a system that works to protect the surface from fouling caused in a marine environment.
Best Uses
Sigmaglide 790 is best used for providing adhesion to SigmaGlide finishes that can be applied over a number of specific systems including ships and appliances that intake sea water.
Application
Sigmaglide 790 can be applied using airless spray to achieve a finish with a theoretical coverage rate of 5-6m2 per litre and produces a semi-gloss, medium grey finish.
Surface and Environment
Sigmaglide 790 can be used in coastal and marine environments, and serves the purpose of protecting vessels and other marine based appliances against fouling. Please feel free to give us a call and find out more information on how this product can be used to best effect.
Technical Details
Approvals
- NATO Approval No. 8010-99-406-0976
Systems
PPG SigmaGlide 790 is used within the following Sika systems:
- PPG 3127 System - SigmaGlide Fouling Release Coating System
See Data Sheets tab for System sheet downloadable PDF.
Notes
- Adhesion promoting coating for SigmaGlide Finishes to be applied on top of specific systems
| Components: | Two Part |
| Type: | Silicone Based Tiecoat |
| Finish: | Semi Gloss |
| Stock Colours: | Medium Grey |
| Tintable: | No |
| VOC Content: | 184.0g per Litre |
| Volume Solids: | 79% |
| Suitable Substrates: | For antifouling |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | 5.3 m2 per litre at 150 microns |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 150 microns |
| Induction Time: | - |
| Pot Life: | 4 hours at 20°C |
| Touch Dry: | 30 minutes at 20°C |
| Overcoatable: | After 6 hours at 20°C |
| Fully Cured: | |
| Cleaner / Thinner: | Do not thin |
| Shelf Life: | At least 26 months when stored cool and dry |
| Packaging: | Available in 20 Litres |
Related Products
RODO Blackrock Lightweight PU Gripper Gloves
Extremely lightweight gloves with PU coated palms and fingers for exceptional dexterity and grip in wet and dry conditions.
From
£0.77
£0.64
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
PPG Amercoat 71 TC
A 2 pack polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
From
£312.96
£260.80
PPG SigmaGlide 1290
An anti fouling release finish coat based on 100% pure silicone binder technology.
From
£2,671.10
£2,225.92
PPG Thinner 90-83
A clear, high performance, thinning liquid, specially made for use with various different PPG paints.
From
£123.43
£102.86
PPG SigmaPrime 200
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.
From
£252.00
£210.00
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
From
£2.34
£1.95