PPG Steelguard 851

UN1263 (Class: 3, Pk Grp: II)
A 1 pack thin film solvent borne intumescent coating for cellulosic fire protection up to 120 minutes on structural steel.
Available in 20 Litres in White Only
From £368.81 £307.34
In stock
Only %1 left
Product Description

PPG Steelguard 851 is a single component thin film solvent borne intumescent coating for the cellulosic fire protection up to 120 minutes on structural steelwork.

Best Uses

PPG Steelguard 851 provides up to 120 minutes protection from cellulosic fires and also benefits from being fast-drying, providing short handling times on both off-site or on-site applications. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required. Weather resistant up to 12 months without topcoat provided the coating has been applied in accordance with INFORMATION SHEET 1222 and is not subject to running or pooling water, high humidity or immersion conditions


Approved primer must be sound, dry and free from any contamination. Stir thoroughly until homogeneous and free from lumps. Apply with airless spray or brush / roller for touch up or repair only. Refer to data sheets for full instructions.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details
Components: Single Pack
Type: Solvent-borne
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 327.0 g/l
Volume Solids: 75 +/- 3%
Suitable Substrates: Structural Steelwork
Application Method: Airless Spray. Brush,or Roller should only be used for small areas (touch up and repair) 
Theoretical Coverage: 1.07m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 200 - 1000 microns per coat
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 20°C
Overcoatable: After minimum 4 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Thinner 21-06 (normally no thinner required)
Shelf Life: At least 18 months when stored cool and dry
Packaging: Available in 20 Litres

Related Products