PPG SigmaFast 205
PPG SigmaFast 205 is a two component high build polyamide cured zinc phosphate epoxy primer/coating.
PPG SigmaFast 205 is a high build polyamide cured zinc phosphate epoxy primer two component high build polyamide cured zinc phosphate epoxy primer/coating and should be used as a general purpose epoxy primer/coating for atmospheric conditions.
Best Uses
PPG SigmaFast 205 is highly suited for use in external conditions for the protection of metal substrates where atmospheric effects can damage the surfaces performance. SigmaFast coatings offer toughness and long term flexibility and offer users speed of application and a fast drying process.
Application
PPG SigmaFast 205 can be applied easily using an airless spray gun with a theoretical coverage rate of 8.8m2 per litre, brought to you at a low cost. SigmaFast 205 is touch dry within 2 hours and can be recoated after just 4 hours. When used as a primer, SigmaFast 205 can be recoated with most two component epoxy and polyurethane topcoats.
Surface and Environment
PPG SigmaFast 205 is highly suited for outdoor use where the need for a decorative and protective coating is of high importance. The atmosphere is constantly working and weather, UV light and general pollution can cause common damage and degradation to most surfaces unless they have been coated with PPG SigmaFast 205.
Features
- Fast curing
- Recoatable with most two component epoxy and polyurethane coatings
- Tough, with long term flexibility
- Easy application by airless spray
Technical Info
| Components: | Two Part |
| Type: | Polyamide Cured Zinc Phosphate |
| Finish: | Semi Gloss |
| Stock Colours: | White and Black |
| Tintable: | Available in a wide range of colours Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 322.0g per Litre |
| Volume Solids: | 70% |
| Suitable Substrates: | For steel and concrete |
| Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
| Theoretical Coverage: | 9.3m2 per litre at 75 microns |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 75 - 150 microns |
| Induction Time: | - |
| Pot Life: | 6 hours at 20°C |
| Touch Dry: | 3 hours at 20°C for 75 microns |
| Overcoatable: | Between 3 hours and 6 months at 20°C for 75 microns |
| Fully Cured: | |
| Cleaner / Thinner: | PPG Thinner 91-92 |
| Shelf Life: | At least 24 months when stored cool and dry |
| Packaging: | Available in 4 and 20 Litres |
