Remmers Epoxy Quick Fix

SKU
id24722
TBC
A combined kit for good all round fast reacting synthetic resin mortar for filling and repair.
Available in 10 Kg
£90.18 £75.15
Out of stock
Product Description

Remmers Epoxy Quick Fix is a combined kit for good all round fast reacting synthetic resin mortar for filling and repair.

Best Uses

Remmers Epoxy Quick Fix is suitable for the filling and repair of hollow and triangular coves, for the filling and repairing missing and broken out areas and for producing sills and transitions.

  • Cures quickly
  • Cures at low temperatures
  • Easy to work

Remmers Epoxy Quick Fix consists of a coordinated packaging unit including primer. Set consists of 1.0 kg epoxy resin in mixing bag, 9.0 kg special filler, 1 brush and 1 pair of disposable gloves in mixing bucket.

Application

The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The substrate must be protected from exposure to moisture from underneath during utilisation. Widen and confine the crack.

Multi-chamber bag
Open the outer packaging along the perforation and remove the transparent multichamber bag. Remove the dividing strip on the bag. Then mix the two components
together by kneading the contents of the bag intensively (approx. 60 seconds). Insufficient mixing is indicated by streaks forming.

Pour max. 20% by mass of the mixed binder for the primer into the shell. Add all of the remaining material to the entire quantity of filler and mix thoroughly straight away. For professional use only.

Technical Details
Components: Kit - Set consists of 1.0 kg epoxy resin in mixing bag, 9.0 kg special filler, 1 brush and 1 pair of disposable gloves in mixing bucket
Type: Filler
Finish:
Stock Colours:
Tintable: No
VOC Content: <500 g/L
Volume Solids:
Suitable Substrates:
Application Method: Smoothing trowel, mixer
Theoretical Coverage: Dependant on substrate
Wet Film Thickness (WFT): Dependant on substrate
Dry Film Thickness (DFT): Dependant on substrate
Induction Time: -
Pot Life: 15 minutes at 20°C
Foot Traffic: 3 hours at 20°C
Overcoatable: After 1 hour minimum at 23°C
Full Mechanical Loading: 24 hours at 20°C
Cleaner / Thinner: Clean tools, equipment and splashed material immediately while fresh with V 101 Thinner
Shelf Life: If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months
Packaging: Available in 10 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products