This product is now discontinued. Please contact our technical team for a suitable alternative.
Remmers QP Color Top Plus is a slip-resistant, pigmented sealant with a very short reaction time. Suitable for use within the Remmers QP System.
Remmers QP Color Top Plus is a low slip pigmented sealant for use within the Remmers QP System.
- High UV resistance
- Full curing at temperatures form 0°C
- Silk gloss surface
- High opacity
- Can be subjected to mechanical loads
The substrate must be load-bearing, dimensionally stable, sound, free of loose constituents, dust, oil, grease, rubber tyre marks and other substances that could interfere with adhesion. The substrate must have been prepared with suitable Remmers products.
Apply the sealant within 12 hours. In case of longer waiting times grind the surface slightly and remove dust. Add the entire quantity of hardener (comp. B) to the basic compound (comp. A). Add comp. C afterwards and mix with a slow speed electric mixer (approx. 300-400 rpm). Mixing time approx. 3 minutes. Streaks indicate insufficient mixing. Directly after mixing, pour the ready to use mix onto the prepared substrate and distribute with suitable tools.
The material can be accelerated by adding the catalyzer Remmers QP CAT (see Technical data Sheet). This is recommended especially at substrate temperatures < +12 °C.
|Stock Colours:||RAL 7035, RAL 7032, RAL 7001|
|VOC Content:||500 g/L|
|Suitable Substrates:||The substrate must have been prepared with suitable Remmers products.|
|Application Method:||PU roller, epoxy roller, smoothing trowel|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Pot Life:||30 minutes at 20°C|
|Fully Cured:||2 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||Clean tools, equipment and splashed material immediately while fresh with Remmers V101 Thinner|
|Packaging:||Available in 10 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.