Solignum Architectural Water Based Opaque Woodstain for exterior wooden surfaces including, windows, doors, cladding, fascias, fences, conservatories, sheds and gates.
Solignum Architectural Water based Opaque Wood Stain works to decorate and protect most types of timber in 2 coats. Solignum Water Based Opaque Wood stain protects against the damaging effects of sunlight. This wood stain is micro porous, allowing the wood to breathe so moisture can evaporate. Solignum Architectural Water Based Woodstain penetrates the surface of the timber giving good adhesion so that no primer is required, and the surface will not crack or peel or blister.
Solignum Architectural Water Based Opaque Woodstain is best used to decorate and protect various different kinds of wood surfaces externally. Architectural Water Based Opaque Woodstain paint works to protect the wood from mould growth and from the harmful effects of UV light. Solignum Water Based Opaque Wood stain does not need much maintenance in order to preserve its colour and strength.
Solignum Coatings Water Based Opaque Wood stain should be applied using brush or roller in order to achieve the best finish. Make sure all surfaces are clean and dry before application is proceeded. Conventional spray can also be used to apply this product if you find this easier than brush or roller.
Solignum Water based Opaque Woodstain can be used for painting a whole range of exterior wooden surfaces including, windows, doors, cladding, fascias, fences, conservatories, sheds and gates. As well as these it is also ideal for solvent preservative treated timber.
- Solignum Architectural woodstain is a water based opaque woodstain and preservative
- It produces a microporous, flexible coating with excellent opacity and a low-sheen finish
- Use Architectural for painting windows, doors, cladding, fascias, fences, conservatories, sheds, gates etc.
- It is ideal for solvent preservative treated timber
- Solignum Architectural penetrates the surface of the timber giving good adhesion so that no primer is required, and the surface will not crack or peel or blister
- Solignum Architectural resists mould growth and protects timber from the harmful effects of UV light
- Solignum is a genuine low maintenance product requiring very little maintenance to preserve its colour and strength
|Finish:||See colour card|
|Stock Colours:||White, Ebony (Black), Jacobean|
|Tintable:||Tintable to house shades|
|VOC Content:||130.0g per Litre|
|Suitable Substrates:||For wood|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||Sawn Wood: 4 - 8m2 per litre per coat
Planed Wood: 8 - 12m2 per litre per coat
|Wet Film Thickness (WFT):||80 microns|
|Dry Film Thickness (DFT):|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 2 hours at 20°C|
|Fully Cured:||4 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years in unopened containers|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.