Teknos AquaTop 2600-2X is a sprayable, brushable and rollerable water borne industrial topcoat for wood designated for exterior use such as windows and doors. Available in various gloss levels. Tintable to opaque and translucent colours.
Teknos AquaTop 2600-2X is formulated as a topcoat for external wood. This product is available in various gloss levels and is tintable to Teknos's range of wooden opaque and translucent shades. This product is ideal for wooden window frames, doors, conservatories and wooden leisure buildings such as cabins or log buildings.
Teknos AquaTop 2600 is suitable for the coating of softwoods, hard woods, or engineered and modified timbers. Teknos Aquatop 2600 provides a flexible durable and microporous protective film which is resistant to attack from bacteria, mould and UV rays. It is also resistant to blocking on storage and stacking.
- Teknos AquaTop 2600-21: 15% Gloss
- Teknos AquaTop 2600-22: 20% Gloss
- Teknos AquaTop 2600-23: 30% Gloss
- Teknos AquaTop 2600-24: 40% Gloss
- Teknos AquaTop 2600-26: 60% Gloss
The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative. Apply using Airmix (aircoat) or airless by hand or in automatic spraying equipment. The product is delivered ready for use. Stir the product well before use.
In order to achieve UV protection when applying a translucent colour, the film layer must minimum be ≥ 80 μm dry (approx. 225 μm wet).
|Type:||Water Borne Synthetic|
|Stock Colours:||Just tints|
Teknos AquaTop 2600-21: Base T (Translucent Colours) - Matt Finish
Opaque Bases tintable to RAL and BS shades. Please note, bespoke tints are non refundable / exchangeable
|VOC Content:||Depends on gloss level|
|Suitable Substrates:||For external woods including softwood, hardwood, or engineered and modified timbers.|
|Application Method:||Air Atomised Spray or Airless Spray, Brush or Roller|
|Theoretical Coverage:||3 - 6 m2 per litre|
|Wet Film Thickness (WFT):||150 - 300 microns|
|Dry Film Thickness (DFT):||Minimum 80 microns to protect against UV rays|
|Dry to Handle:||2 - 3 hours at 20°C|
|Overcoatable:||After 3 - 4 hours at 20°C|
|Cleaner / Thinner:||Clean up with water|
|Shelf Life:||See tin for best before date. Keep stored above 5°C|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.