Teknos Futura Aqua is suitable for indoor use on primed and previously painted with alkyd paint painted wood, metal and building board surfaces: doors, uPVC, window casements, kitchen cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems. It is also suitable for plaster and filler surfaces primed with Teknos Futura Aqua 3, for example window sills and casings, and wall surfaces in special objects, e.g. staircases.
When used externally Futura Aqua 20 is suitable for painting primed window casements, doors, garden furniture etc.
Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with Teknos Silora A carpentry filler.
Wood, wood fibre board and building board surfaces as well as galvanized metal surfaces should be painted with Teknos Futura Aqua 3 Primer. Rusting steel surfaces as well as aluminium and copper surfaces are primed with Teknos Ferrex Aqua anti-corrosive paint.
Before use stir the paint thoroughly. The paint is thinned with water 5 - 15 % by volume when needed. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush.
Airless spray nozzle 0.011 - 0.013''.
|Type:||Water-borne urethane alkyd|
|Finish:||Semi Gloss = 40% Gloss|
|Tintable:||Can be tinted to obtain the shades in the Interior Colour Cards and RAL, BS Shades. The colour accuracy is not complete. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||EU VOC limit value (kat A/d): 130 g/l. The product's VOC: max. 130 g/l.|
|Volume Solids:||40 %|
|Suitable Substrates:||Wood, metal and building board surfaces|
|Application Method:||Varnish brush, mohair roller, painting pad or spray.|
|Theoretical Coverage:||8 - 10 m²/l|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||After 1 hour at 23°C|
|Overcoatable:||After 14 hours at 23°C|
|Fully Cured:||After 2-3 days at 23°C - The drying will be slowed down if the air is cool and/or humid.|
|Cleaner / Thinner:||Water|
|Shelf Life:||Must Not Freeze|
|Packaging:||Available in 0.9, 2.7 and 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A water-borne, full matt, alkyd based adhesion primer. For wooden and galvanized surfaces indoors. For wooden surfaces outdoors.