£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Teknos Anti-Stain Aqua 2901 Primer For Spray Application

SKU
id18375
Non Hazardous
Sprayable water borne industrial primers for new wood designated for exterior use such as windows and doors.
Available in 3, 10 and 20 Litres
From £32.16 £26.80
In stock
Only %1 left
main product photo
Product Description

Teknos Anti-Stain Aqua 2901-00 and 2901-02 are sprayable water borne industrial primers for new wood designated for exterior use such as windows and doors.

Best Uses

Teknos Anti-Stain Aqua 2901 reduces surface discoloration caused by tannins in hardwood. This version of this product is suitable for spray application. If you would prefer the version for application via flow coating or dipping see Teknos Anti-Stain Aqua 2901 Primer For Flow Coating / Dipping.

  • Teknos AntiStain Aqua 2901-02 is Colourless
  • Teknos AntiStain Aqua 2901-00 is Clean White and Antique White

Application

The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative.

The use of ANTISTAIN AQUA 2901-52 as a pre-treatment, prior to spraying with ANTISTAIN AQUA 2901-00, will improve the wetting of open porous substrates.

Apply using Airmix (aircoat) or airless by hand or in automatic spraying equipment. Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.

Technical Details
Components: One Part
Type: Water Borne Synthetic Primer
Finish: Opaque
Stock Colours: Antique White
Tintable: No
VOC Content: 12.0g per litre
Volume Solids:  
Suitable Substrates: For spraying exterior wooden windows and doors
Application Method: Air Atomised Spray or Airless Spray
Theoretical Coverage: 8 - 10 m2 per litre
Wet Film Thickness (WFT): 100 - 125 microns
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Handle Dry: 2 - 3 hours at 20°C
Overcoatable: After 3 - 4 hours at 20°C
Fully Cured:  
Cleaner / Thinner: Clean up with water
Shelf Life: See best before date on label
Packaging: Available in 3, 10 and 20 Litres
Product Data Sheet (154.33 kB)
Product Data Sheet (153.80 kB)
Safety Data Sheet - Antique White (133.64 kB)
Safety Data Sheet - White (139.61 kB)
Safety Data Sheet (151.88 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products