Teknos Anti-Stain Aqua 2901-52 and 2901-62 are flow coatable / dippable water borne industrial primers for new wood designated for exterior use such as windows and doors.
Teknos Anti-Stain Aqua 2901 reduces surface discoloration caused by tannins in hardwood. This version of this product is suitable for flow coating or dip application. If you would prefer the version for application via spray see Teknos Anti-Stain Aqua 2901 Primer For Spray Application.
- Teknos AntiStain Aqua 2901-00 is Clean White and Antique White
- Teknos AntiStain Aqua 2901-62 is Colourless
The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative.
To be applied by flow coating or dipping. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. The product is delivered ready for use, but can be diluted with water. Stir the product well before use.
Primed parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.
|Type:||Water Borne Synthetic Primer|
|Stock Colours:||Colourless, Clean White and Antique White|
|VOC Content:||12.0g per litre|
|Suitable Substrates:||For flow coatable or dippable exterior wooden windows and doors|
|Application Method:||Flow Coat or via Dip|
|Theoretical Coverage:||6 - 8 m2 per litre|
|Wet Film Thickness (WFT):||125 - 175 microns|
|Dry Film Thickness (DFT):|
|Handle Dry:||1 - 2 hours at 20°C|
|Overcoatable:||After 2 - 3 hours at 20°C|
|Cleaner / Thinner:||Clean up with water|
|Shelf Life:||See best before date on label|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.