Soppec Reflect Light Aerosol can be applied to a number of different surfaces, including Steel, Timber, Masonry, Plastic and previously painted substrates, in order to produce a highly reflective coating.
Soppec Reflect Light Aerosol is a clear light reflective paint coating that illuminates when it is subjected to a light source. Reflect Light can be used for both safety and decorative applications. Reflect Light can be applied onto most substrates such as steel, timber, masonry, plastics and previously painted surfaces. Soppec Reflect Light Aerosol is part of Promains selection of quick drying, super effective street furniture coatings.
Soppec Reflect Light Aerosol is suitable for many uses such as highlighting bollards, railings, barriers, fences and gates. Soppec Reflect Light Aerosol can be applied to a number of surfaces that are exposed to a light source, and will illuminate when subjected to it. Soppec Reflect Light Aerosol is suitable for applying decoration to a substrate but is intended mainly for safety purposes and works best in the dark to provide a reflective coating.
Soppec Reflect Light Aerosol is quick and easy to apply. Simply shake the can until the mixing ball is heard and apply the product by holding the can approximately 25 cm away from the substrate and using a back and forth motion while shaking frequently during use.
Surface and Environment
Soppec Reflect Light Aerosol can be applied to a number of different surfaces, including Steel, Timber, Masonry, Plastic and previously painted substrates, in order to produce a highly reflective coating. Soppec Reflect Light Aerosol is ideal for use on steel furniture than can often be hard to see in the dark and reflects any light source more efficiently than the natural steel substrate would or other conventional decorative paints.
- Clear Light Reflective Paint that illuminates when subjected to a light source
- It can be applied onto many substrates such as steel, timber, masonry, plastic, previously painted substrates etc
- Suitable for safety and decorative applications
- Only slightly visible in daylight, it doesn't affect the overall appearance of the substrate
- Suitable for use as a safety product to highlight bollards, railings, barriers, gates, fences etc
- To improve the longevity of Reflect Light, it is recommended to protect it with a clear top coat
|Stock Colours:||Clear but Reflective|
|Suitable Substrates:||Can be applied to a wide range of surfaces (concrete, wood, asphalt, metal, stone, etc). (On plastic or painted surfaces, it is advisable to test beforehand to check compatibility).|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||5 minutes at 20°C|
|Cleaner / Thinner:|
|Packaging:||Available in 500ml Aerosols|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.