Coo-Var Matt White

SKU
id23707
UN1263 (Class: 3, Pk Grp: III)
A quick drying, matt white finish to wood, metal, plaster and many more substrates internally and externally.
Available in 1, 2.5 and 5 Litres
From £17.11 £14.26
In stock
Only %1 left
Product Description

Coo-Var Matt White gives a quick drying, matt white finish to wood, metal, plaster and many more substrates internally and externally.

Best Uses

Coo-Var Matt White is ideal for use as a compliment to Coo-Var Matt Black. It has a very high opacity and the resultant surface is ideal for Tudor style beams, photographic studios, window ledges & fascias and anywhere a white, non reflective surface is required.

Application

All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Prime bare wood with Coo-Var Penetrating Wood Primer, use Coo-Var Zinc Phosphate Primer on metal. Apply via brush, roller or airless spray.

Technical Details
Components: Single Pack
Type: Solvent Based
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 437 g/L
Volume Solids: 44%
Suitable Substrates: Wood, metal, plaster and many more substrates
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 13 m2 per litre at 35 microns
Wet Film Thickness (WFT): 75 microns
Dry Film Thickness (DFT): 35 - 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hous at 20°C
Overcoatable: After 12 hours or overnight at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinners 14
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 1, 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use