Sports-Cote Flexible Filler Resin is a waterproof cement additive suitable for patching, crack filling and levelling of tarmac, concrete, brick, stone, etc.
When mixed with cement, Flexible Filler Resin reacts with the cement to form a flexible rubber like compound which is highly adhesive and waterproof. The flexible quality of Flexible Filler Resin allows the repair compound to move with the substrate to give a longer lasting repair solution to cracks and patches. Make good defects such as cracks, blow holes, ponding areas on tarmac and concrete by adding Flexible Filler Resin to a mix of ordinary Portland Cement and sharp sand.
Add Flexible Filler Resin to cement mortar for repairs to car parks, tennis courts, warehouse floors, garages, workshops on surfaces such as asphalt, concrete, brick, stone, tile, slate, metal, felt, wood, asbestos, etc.
Initial set will take approximately 8 hours at 20°C with full cure after 3-4 days. The area will need to be protected from rain, dew and frost during the drying process. The end result will be a flexible, waterproof, weather and UV resistant barrier.
Apply cement mortar mixed with Flexible Filler Resin by trowel or barrel gun after preparation of the substrate.
Clean up tools with water before Flexible Filler Resin dries.
- A water-based resin additive for use with cement mortar
- Forms a flexible mix that will move with the substrate
- Highly adhesive for easy use
- Waterproof, weather and UV resistant
- Suitable for use on concrete, brick, stone, tile, slate, asphalt, bitumen, wood and more
- Clean off with water
- Available in 5 Litre tins.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.