Teamac Stable Paint

SKU
id10173
Non Hazardous
A fast drying, easy to clean sealing paint for use in agricultural outbuildings and equestrian buildings, including stables.
Available in 5 Litres
From £48.40 £40.33
In stock
Only %1 left
Product Description

Teamac Stable Paint fast drying, easy to clean sealing coat for use in stables, agricultural and equestrian outbuildings.

Teamac Stable Paint is a fast drying, water based coating for plaster and brickwork. It provides a low reflective matt white sealing finish. It is suitable for application to wood, masonry and porous surfaces. Teamac Stable Paint can also be used on metal surfaces, but a metal primer should be applied first.

Best Uses

Teamac Stable Paint is for use as a sealer or finish coat in side stables and outbuildings, as a quick drying paint with a low odour it is possible to empty, paint and move livestock such as horses back into the building in one day.

Application

Teamac Stable Paint should be mixed well before use. It is applied with a brush, at temperatures which are not below 7°C. Although this is a water based product, adequate ventilation should be provided during the application and drying periods.

Surface and Environment

All surfaces should be clean, dry, sound and free from contaminants, before the application of Teamac Stable Paint. New wood should be sanded prior to coating and existing painted surfaces should be cleaned, degreased and sanded, to ensure a good 'key'. Teamac Stable Paint can be applied directly onto wood, masonry and porous surfaces. A metal primer should be used when application to metals is required.

Technical Details

Notes

  • Sealant or topcoat
  • Metal primer should be used with metal surfaces
  • Not for appliction below 7°C

Technical Info

Components: One Part
Type: Water Based
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 30.0g per Litre
Volume Solids: 33%
Suitable Substrates: For plaster, bricks and wood
Application Method: Brush
Theoretical Coverage: 13 m2 per litre at 35 microns
Wet Film Thickness (WFT): 75 microns
Dry Film Thickness (DFT): 35 - 40 microns
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use