Teamac Teamalak Yacht Varnish

SKU
id24467
UN1263 (Class: 3, Pk Grp: III)
For use on yacht and boat wood surfaces as a gloss, UV resistant finish.
Available in 2.5 and 5 Litres
From £54.49 £45.41
In stock
Only %1 left
Product Description

Teamac Teamalak Yacht Varnish V601 is a full gloss, UV resistant finish for yacht woodwork and furniture.

Best Uses

Teamac Teamalak Yacht Varnish is for use on all wood
surfaces where a high gloss, UV resistant finish is required. Suitable for use on yacht woodwork and wooden marine furniture in both interior and exterior environments. Can be used over existing paintwork to increase gloss finish.

Application

Apply using either brush, roller or airless spray as per data sheet. Clean up after use with Teamac Thinners 14.

Technical Details
Components: One Part
Type: Solvent Based
Finish: Full Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 393.0g per Litre
Volume Solids: 49%
Suitable Substrates: For interior and exterior wood
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 14 m2 per litre at 35 microns
Wet Film Thickness (WFT): 70 microns
Dry Film Thickness (DFT): 30 - 35 microns
Induction Time: -
Pot Life: -
Touch Dry: 6 hours at 20°C
Overcoatable: After 12 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinner 14
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use