Teknos Futura Aqua 5 is suitable for overcoating primed wood and metal in interior environments that have been previously painted with a compatible alkyd paint. Suitable for application onto internal metal and building board surfaces such as doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and pipes.
Teknos Futura Aqua 5 is also suitable for plaster and filler surfaces primed with Teknos Futura Aqua Primer such as window sills and casings, or ornate wood items such as staircases and balustrades internally.
Ensure new wood / metal is free from dust and dirt.
Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with Teknos Silora A carpentry filler.
Ensure to prime wood, wood fibre board and building board surfaces and galvanized metal surfaces before application with Teknos Futura Aqua Primer. Rusting steel surfaces and aluminium and copper should be primed with Teknos Ferrex Aqua anti-corrosive paint before use.
Before use stir the paint thoroughly. The paint can be thinned with water 5 - 15% by volume as required. Apply the paint in either 1 or 2 coats with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. If applying via airless spray use airless spray nozzle 0.011 - 0.013''.
|Type:||Water-borne urethane alkyd based|
|Stock Colours:||Black and White|
|Tintable:||Yes, to Teknos colour ranges. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||130 g/L|
|Suitable Substrates:||Suitable for primed and previously with alkyd paint painted wood,
metal and building board surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems.
|Application Method:||Varnish brush, mohair roller, painting pad or spray|
|Theoretical Coverage:||8 - 10 m2/L|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dust Dry:||1 hour at 23°C|
|Overcoatable:||After 6 hours at 23°C|
|Fully Cured:||2 - 3 days at 23°C|
|Cleaner / Thinner:||Water. Wash the equipment immediately after use with warm water and Teknos Rensa Brush Cleaner.|
|Shelf Life:||2 years minimum in original unopened containers.|
|Packaging:||Available in 2.7 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A water-borne, full matt, alkyd based adhesion primer. For wooden and galvanized surfaces indoors. For wooden surfaces outdoors.