Thermoguard Smoke & Flame Retardant Dualcoat Matt & Eggshell

Thermoguard Smoke & Flame Retardant Dualcoat Matt & Eggshell is a decorative topcoat finish for use in a Thermoguard 30 - 60 minute fire protection system.

Best Uses

Thermoguard Smoke & Flame Retardant Dualcoat Matt & Eggshell provides a decorative finish within a Thermoguard paint system over compatible products including Thermoguard Safewood Insulating Basecoat within the Thermoguard Dualcoat Intumescent 30/60 system. This coating within a Thermoguard system will provide protection to wood and wood-based boards. Achieves BS EN Class B s1 dO safest standards for toxic smoke s1 flaming droplets dO and flamespread / insulation Class A2 + B. Previous Class O compliant.

Tintable to NCS, RAL, BS4800, BS381 and Thermoguard Select colour ranges.

Thermoguard Smoke & Flame Retardant Dualcoat Matt & Eggshell is suitable for use on suitable external timber cladding. Ensure thorough application to all sides. If not practical, seal void with fire rated foam and acrylic intumescent mastic. For bare existing porous wood boards, Thermoguard recommend Thermoguard Thermoproof Exterior.

Can be used as part of a system to achieve 30 or 60 minutes fire resistance.

How it works: The initial Thermoguard Insulating Basecoat expands in a fire to create a resilient insulating barrier. Thermocoat Dualcoat Smoke and Flame Retardant emits a safe fire-damping vapour in a fire to control flame spread and suppress smoke.

Thermoguard Dualcoat SFR’s polyurethane hardened acrylic “cross-links” during the drying process to form a smoother, harder, more cleanable surface than typical wall paints. Therefore, it will help eliminate the microscopic pockets that host bacteria which prevent effective cleaning. Provides a unique formulation concentrated mix of safe, biocidal metal encapsulated nano-particles attacks viruses and bacteria that settle on surfaces, damaging their protective “envelope” to kill their live cores and disable their spikes penetration of lung’s cells.

Application

All previous Thermoguard Insulating Basecoats must be clean and fully cured. Stir product well before use. Apply via woven short pile roller sleeve or synthetic brush at rate stated on can.

Apply 1 or 2 coats as per specification.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.