
Thermoguard Thermoproof Exterior
Thermoguard Thermoproof Exterior is a penetrating fireproof fluid for bare external wood such as Timber Cladding, T&G, Shiplap and other bare timber substrates.
Best Uses
Thermoguard Thermoproof Exterior is suitable as a clear timber penetrating fluid, providing fire and flame resistance for external wooden substrates. Weather resistant, water-based and non-flammable formula. Enables safe application by untrained and inexperienced users.
Works by penetrating deep into porous wood. When exposed to fire Thermoguard Thermoproof Exterior creates an inert layer within the wood’s surface which insulates the wood from fire, preventing flamespread.
Application
For treatment with Thermoguard Thermoproof Exterior Fluid to be effective it needs to be able to penetrate the wood. Remove any water resistant coating, sealer coat, waxy feel, glossy sheen, or waterproofing effect created by a previous treatment or preparation before application.
Apply at 3.5m2 per litre. Normally applied in 3 coats at 10.5m2 per litre but can be applied in 2 coats at 7m² per litre on very porous rough sawn wood.
Ensure each application has fully soaked in before applying the next. Allow a minimum of 2 hours between applications. Apply to small test patch prior to main application.
Apply to dry wood (below 18% moisture) above 5°C in dry conditions prior to painting or waterproofing. Where possible wait until the wood has thoroughly dried out before fixing.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Test Results
- BS EN Class B s2 dO
- Class O
- For 30 or 60 mins Promain's Technical Team
Technical Info
| Components: | Single Pack |
| Stock Colours: | Clear |
| Tintable: | No |
| Suitable Substrates: | Timber Cladding, T&G, Shiplap and other bare timber substrates. |
| Cleaner / Thinner: | Clean equipment immediately after use with water. |
| Shelf Life: | See container |
| Packaging: | Available in 5 Litres |
| Application Method: | Brush, Roller, Spray |
| Theoretical Coverage: | 19m2 per 5 litres |
| Overcoatable: | No |

