Zeroflame Topcoat C

Zeroflame Topcoat C is a waterborne, transparent topcoat, for use over Zeroflame Wood-C.

Best Uses

Zeroflame Topcoat C has been successfully fire tested with Zeroflame Wood-C. It is available in a matt or satin finish and is for interior use only.

• Transparent waterborne topcoat for Zeroflame Wood-C
• Available in either a Matt or Satin finish
• Touch Dry in 1 hour

Application

Always ensure that the surfaces to be coated are thoroughly cleaned, dry and free from any oil, grease, dust, etc. prior to application.

The recommended application methos for Topcoat C, is by either brush, roller or spray. When spraying, it is recommended to use a heating pack/heating hose to reduce any spray mist and also for an improved spray pattern. If you choose to apply by roller, consider applying a thin layer without back rolling. Let that dry, and then apply layer two in the same manner for full coverage.

The number of coats required depends on the application method and the standard of finish required, ensuring at all times that the maximum stated coverage rate is not exceeded.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.