Aquafloor Anti Slip floor coating is suitable for the swimming pool side apron, kitchens and other areas requiring a slip resistant surface.
Aquafloor Anti Slip is low odour, water based, polyurethane floor coating. The polyurethane/acrylic binder system and Polytetrafluoroethylene (PTFE) formulation reduces dirt entrapment and provides an easily clean surface.
Aquafloor Anti Slip is best for utilisation in environments where Health and Safety concerns, regarding slips and falls, necessitates an anti slip surface. Due to its low odour nature, Aquafloor is also recommended for food production areas, eliminating the potential for food (odour) contamination.
Aquafloor Anti Slip floor coating is ideal for areas where water pools on floors, for example areas around swimming pool such as the apron and in kitchen, food and confectionery areas. Areas where safety is a prime consideration. As Aquafloor Anti Slip is water based, there is very little odour making Aquafloor a versatile slip resistant floor paint which is ideal for confined areas or areas where contamination to foodstuffs is a concern.
The fine aggregate that is blended into Aquafloor Anti Slip has been selected as it offers a high degree of slip resistance but, due to its rounded surface nature, it does not cause discomfort to bare feet in swimming pool environments.
Surface and Environment
Aquafloor Anti Slip coating if for use on floor surfaces which require an anti slip finish and within areas, such as food production areas, where a low odour product is essential.
- Store between 5-25 degrees celsius
- Fine aggregate
- Two coat application
- Contains PTFE
|Stock Colours:||Broad range of colours available|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||Kitchens, Food preparation areas, garages, Industrial Walkways, Light mechanical areas, Concrete or Wooden areas|
|Application Method:||Brush, Roller, Airless Spray or Air-Atomised Spray|
|Theoretical Coverage:||8-10 square meters per litre depending upon type of application|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Average Drying Time:||2 hours at 20°C @ 60%RH|
|Overcoatable:||After 4-6 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||6 months in unopened containers|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.