£9.95 delivery on orders excluding certain products & postcodes *
Blackfriar Acrylic Floor Paint is used to protect and transform floors with an attractive, hard wearing, tough and durable finish, available in black, green, red, grey and white. Blackfriar Acrylic Floor Paint can be applied to most workshop floors to provide users with a tough semi-gloss finish.
Blackfriar Acrylic Floor Paint is suitable for use on most previously painted surfaces and is water-based product with quick drying time, which helps minimise downtime, thus preventing money loss. Blackfriar Acrylic Floor Paint has low odour properties, which are ideal where paint odours currently present an issue.
This Acrylic Floor Paint can be applied indoors or outdoors on workshop floors and can be applied using brush or roller to achieve the desired finish, with a theoretical coverage rate of 10-12m2 per litre. In conditions of about 20°C, your drying time will be approximately 4-6 hours, this will increase or decrease depending on warmer or colder conditions.
Blackfriar Acrylic Floor Paint is ideal for use on most surfaces, including wood, concrete, stone, asphalt and tarmac in light traffic areas and areas with heavy foot traffic. Blackfriar Acrylic Floor Paint is resistant to spillages including, oil, grease and a variety of chemicals and household liquids such as coffee and tea. This product works excellently at resisting against abrasion and will not be affected by the heavy level of foot traffic. It is part of the wider range of floor paints available from Promain.
Components: | One Part |
Type: | Water Based Acrylic |
Finish: | Semi Gloss |
Stock Colours: | Black, Mid Grey, Tile Red, White |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 140.0g per Litre |
Volume Solids: | |
Suitable Substrates: | For internal and external wood, concrete, asphalt and Tarmac® |
Application Method: | Brush, Roller |
Theoretical Coverage: | 10 - 12 m2 per litre per coat. Two coats recommended |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 4 - 6 hours at 20°C |
Overcoatable: | After 6 hours at 20°C |
Fully Cured: | 3 - 5 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 2.5 and 5 Litres |