FLAG Anti Slip Water Based Floor Paint

SKU
id23961
Non Hazardous
A fast drying, non-toxic, low odour, single pack water based acrylic paint designed to seal, colour and protect concrete floors.
Available in 5 and 20 Litres
From £38.83 £32.36
In stock
Only %1 left
Product Description

FLAG Anti Slip Water Based Floor Paint is a fast drying, non-toxic, low odour, single pack water based acrylic paint designed to seal, colour and protect concrete floors.

Best Uses

FLAG Anti Slip Water Based Floor Paint contains dolomite stone for added strength and anti-slip properties. FLAG Anti Slip Water Based Floor Paint has excellent water, petrol and oil resistant also ideal for general walkways due to the floor paints excellent long lasting durability and colour retention.

Suitable for interior use on concrete, stone and wooden floors. Suitable for some external flooring - contact our technical team to discuss your requirements.

Application

The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It is only necessary to seal a porous substrate such as new or bare concrete. A sealer coat is achieved by adding 10% water to the paint. Please note any new concrete floor can only be painted after 6-8 weeks. Apply using a brush or roller. Clean up with water.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Semi Gloss
Stock Colours: Red 04-C-39, Green 14-C-39, Grey 00-A-05, Blue 20-D-45 and Black
Tintable: No
VOC Content:
Volume Solids: 50%
Suitable Substrates: Internal Concrete, stone and wooden floors. Contact us for the external floors it is suitable for
Application Method: Brush, Roller
Theoretical Coverage: 10 - 12 m2 per litre
Wet Film Thickness (WFT): 75 - 100 microns/coat
Dry Film Thickness (DFT): 35 microns per/coat
Induction Time: -
Pot Life: -
Touch Dry: 1 - 2 hours at 20°C
Overcoatable: After 8 - 10 hours at 20°C - Do not exceed 5 days for overcoating
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 5 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use