Blackfriar Epoxy Floor Primer
Blackfriar Epoxy Floor Primer is a two pack water-based primer for applying to difficult and well worn surfaces prior to applying Blackfriar Professional Epoxy Floor Paints.
Best Uses
Blackfriar Epoxy Floor Primer is used to stabilise friable and porous concrete substrates, or previously painted floors, prior to application of Blackfriar Professional Epoxy Floor Paints.
Application
The recommended application method is by brush or roller. Prior to application, ensure that the surface to be painted is sound, clean and dry from grease etc. Any old, flaking paint should be scraped off.
Application to Concrete
New concrete should be left for a minimum of 6 months before applying Blackfriar Epoxy Floor Primer.
Do not apply Blackfriar Epoxy Floor Primer on concrete surfaces that have been treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding
solutions.
If concrete floors are very smooth then pre-treat them with Blackfriar Professional Acid Etch followed after thorough rinsing by Blackfriar Professional Epoxy Floor Primer.
| Components: | Two Pack |
| Type: | Epoxy Primer |
| Finish: | - |
| Stock Colours: | Clear |
| Tintable: | No |
| VOC Content: | 140g/l |
| Volume Solids: | - |
| Suitable Substrates: | Concrete |
| Application Method: | Brush, Roller |
| Theoretical Coverage: | 10-15m2/litre per coat. |
| Induction Time: | - |
| Pot Life: | 2 hours at 20°C |
| Touch Dry: | 6 hours at 20°C |
| Overcoatable: | Min 8 hours to max 72 hours at 20°C between coats |
| Fully Cured: | 5-7 days at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | See tin for shelf life and storage information |
| Packaging: | Available in 5 Litres |
