£7.50 delivery on orders excluding certain products & postcodes *
Blackfriar Water Based Epoxy Floor Paint is a hard-wearing, heavy duty, easy-to-clean floor coating ideal for indoor heavy traffic areas. Excellent resistance to chemicals and abrasion, while its low-odour formula makes it ideal for sensitive areas.
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Water Based Epoxy Floor Paint. For previously painted areas ensure existing coatings are well adhered to the substrate and mechanically abrade glossy surfaces.
Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Allow to rest for 5 minutes before using. Pot life is 2 hours at 20°C. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Water Based Epoxy Floor Primer followed by 1-2 coats of Blackfriar Professional Water Based Epoxy Floor Paint. On previously painted surfaces apply 1-2 coats as required.
Blackfriar Professional Water Based Epoxy Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in cold (below 15°C), damp or humid conditions. If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed after thorough rinsing by Blackfriar Professional Water Based Epoxy Floor Primer prior to applying 1-2 coats of Blackfriar Professional Water Based Epoxy Floor Paint. Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres.
Components: | Two Part |
Type: | Water Based |
Finish: | Semi Gloss |
Stock Colours: | Black, Bright Red, Green, Grey, Tile Red, White, Yellow |
Tintable: | No |
VOC Content: | 140.0g per Litre |
Volume Solids: | |
Suitable Substrates: | For interior brickwork, concrete, cement, wood, metal and stone |
Application Method: | Brush, Roller |
Theoretical Coverage: | 6 m2 per litre per coat. Two coats recommended. |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | 2 hours at 20°C |
Touch Dry: | 12 hours at 20°C |
Overcoatable: | Between 12 - 72 hours at 20°C |
Fully Cured: | 5 - 7 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.